Planters are widely used nowadays and are better planting machinery. Planters used for certain types or crops are often named by crop types, such as wheat planters, cotton planters, etc. How to scientifically maintain the planter.

The soil in all parts of the planter must be cleaned up. Clean the seeds and fertilizer from the fertilizer box. Especially the fertilizer tank, after washing it with clean water and wiping dry, apply anti-corrosion paint in the tank (except the plastic tank). Check the planter for damaged and worn parts, replace or repair if necessary, and repaint the place where paint is peeled off.

After the new planter is used, if a disc opener is selected, the opener should be removed, and the outer cone, disc hub and linoleum should be washed with diesel or gasoline, and then coated with butter before installation. If there is any deformation, it should be leveled. If the disc focusing gap is too large, it can be adjusted by reducing the adjustment spacer between the inner and outer cones. After cleaning the soil working parts, apply butter or waste engine oil to avoid rust.

The planter should be stored in a dry and ventilated warehouse or shed, and avoid open storage. When storing, the rack should be supported firmly, and the opener and cover should be padded with plates, and do not directly touch the ground. The rubber or plastic seed conveying pipes and fertilizer pipes on the planter should be removed, wiped clean, tied up, and put in a box or put on a shelf for storage. Sand or hay can be filled into the tube to avoid squeezing, folding and deformation. After the planter has been stored for a long period of time, before planting in the next season, maintenance and repair should be carried out in advance to keep the equipment in a sound technical condition.